Reference / Timing / ITU-R M.1677-1
Morse code timing: WPM calculator and character duration
Pick a speed from 1 to 80 WPM and see how long a dot, a dash and every gap last. Then look up any letter, number, symbol or prosign and see exactly how many milliseconds it takes to send. If you are new to the basics, read what is Morse code.
View method →Quick answer
One formula runs everything
Dot length in milliseconds = 1200 ÷ WPM. A dash is three dots, a letter gap is three dots and a word gap is seven dots.
At 20 WPM one dot is 60 ms, a dash is 180 ms and the pause between words is 420 ms. The numbers come from the word PARIS, which is exactly 50 units long, so sending it 20 times in a minute gives 20 WPM.
Calculator / 57 characters
Set a speed, then compare every character
Move the slider or type an exact value. The table recalculates instantly and the character you choose is highlighted. Look up any letter in the Morse code alphabet chart to compare patterns.
| Character | Code | Type | Dots | Dashes | Units | Duration |
|---|
Shared codes
Two codes belong to two characters
-...-Equals sign (=) and <BT>The same pattern is used for the equals sign and for the BT break prosign. Context decides which one is meant.
.-.-.Plus sign (+) and <AR>The plus sign and the AR end-of-message prosign are the same sequence. Both rows are listed so nothing is hidden.
Worked examples
How long do real signals take?
| Signal | Units | At 10 WPM | At 20 WPM | At 30 WPM |
|---|
Digits are the slowest characters. See the Morse code numbers 0-9 guide.
Method
Formula, files and limits
unit ms = 1200 ÷ WPM
dot = 1 unit · dash = 3 units
gap inside a letter = 1 unit
gap between letters = 3 units
gap between words = 7 units
character units = dots + (3 × dashes) + (marks − 1)
duration = character units × unit ms
What this covers
The calculations apply the standard timing model to each character at the speed you choose. Spacing between characters is not included in a single character’s duration, so total sending time for a word also needs the letter gaps.
What it does not cover
Real operators and devices vary. Farnsworth spacing, human rhythm, noise and equipment delay are outside these figures. Do not use this table as the only check for safety or regulated communication.
Sources
The standards behind the timing model
Morse code timing questions
How do you convert WPM to dot length in Morse code?
Divide 1200 by the speed in words per minute. The answer is the length of one dot in milliseconds. At 20 WPM a dot lasts 60 ms, and at 10 WPM it lasts 120 ms.
What is the 1-3-7 rule?
A dot lasts 1 unit, a dash lasts 3 units, the gap between letters is 3 units and the gap between words is 7 units. The gap between the dots and dashes inside one letter is 1 unit.
Why is the word PARIS used to measure Morse speed?
PARIS, with the gap that follows it, is exactly 50 units long. Speed in WPM means how many times per minute you can send that 50-unit word, which is why one unit lasts 1200 divided by WPM milliseconds.
How long does SOS take in Morse code?
SOS is 27 units long when sent as three separate letters with normal letter gaps. At 20 WPM that is 1.62 seconds.
What is Farnsworth timing?
Farnsworth timing sends each character at a fast speed but adds extra space between characters and words. It helps learners recognise sounds without slowing the letters down.
Which Morse code characters take the longest to send?
Digits and punctuation. Zero is five dashes and takes 19 units. Dollar sign takes 17 units and period, comma and question mark take between 15 and 19 units.
