← Morse Code Guides

Alphabet and Symbols / Guide

Morse code punctuation and symbols

Letters and numbers get all the attention, but punctuation is where Morse code gets interesting. Some marks are official, some are only habit, and several share a pattern with a radio signal. This guide lists every mark we support, says which ones the ITU actually defines, and shows how to write and read them without mistakes.

Morse Code Translators Editorial TeamNov 11, 20269 min readSource: ITU-R M.1677-1

Quick answer

Punctuation in one paragraph

Morse code has its own pattern for each main punctuation mark. The period is .-.-.-, the comma is --..--, the question mark is ..--.., the slash is -..-. and the at sign is .--.-.. Most marks are six signals long. The ITU standard defines about a dozen of them, and a handful more, such as the exclamation mark, are common habit.

Each mark is sent as a character of its own, with the same three-unit gap before and after it that letters get. For letters and numbers, see the alphabet chart and our guide to Morse code numbers.

01 / Official marks

Punctuation defined by the ITU

These 13 marks appear in ITU-R Recommendation M.1677-1, the document that defines International Morse code. Press play to hear one. The “hides” column shows the letters that, run together, make the same pattern. It is a surprisingly good memory aid, and I will come back to it below.

MarkNameMorse codeHidesUnitsAt 20 WPMHear
.Period (full stop).-.-.-AAA171.02 s
,Comma--..--MIM191.14 s
?Question mark..--..IMI15900 ms
'Apostrophe.----.WG191.14 s
:Colon---...OS171.02 s
-Hyphen-....-DU15900 ms
/Slash-..-.DN13780 ms
(Opening parenthesis-.--.KN15900 ms
)Closing parenthesis-.--.-KK191.14 s
"Quotation mark.-..-.RR15900 ms
=Equals sign-...-BT13780 ms
+Plus sign.-.-.AR13780 ms
@At sign.--.-.AC171.02 s

The ITU table also lists a multiplication sign, which uses the same pattern as the letter X (-..-). It only makes sense inside a calculation, so most charts leave it out. Some reference lists use -.--.- for both brackets; the ITU table gives separate patterns for opening and closing, as shown here.

02 / Common extras

Symbols that are habit, not standard

Five more marks turn up on almost every chart, including ours, but they are not in the ITU table. Operators made them by sending two letters as one signal. They work when both sides expect them and fail when a decoder has never heard of them.

MarkNameMorse codeWhere the pattern comes fromUnitsHear
!Exclamation mark-.-.--K and W sent together19
&Ampersand.-...The same pattern as the wait signal AS11
;Semicolon-.-.-.The same pattern as KR and the start signal CT17
_Underscore..--.-U and K sent together17
$Dollar sign...-..-S and X sent together17

Charts that claim “all punctuation is official” are mixing these two groups. If you need a result that any operator or decoder will accept, stay with the 13 in the first table.

03 / Hidden letters

Why the patterns look the way they do

Most punctuation marks are two or three letters sent without the usual gaps. The period is three A’s: .- .- .- with the spaces taken out is .-.-.-. The comma is MIM (-- .. --) and the question mark is IMI (.. -- ..). The at sign is simply A and C, which is exactly how it reads.

You do not have to memorise those letter combinations, but when a pattern refuses to stick, the hidden letters often give you a way in.

04 / Shared patterns

Marks that are also radio signals

Morse code reuses patterns. A few punctuation marks have exactly the same dots and dashes as operating signals used on the air. On paper, context tells you which one is meant. On the air, the operator knows from the conversation.

MarkPatternAlsoMeaning as a signal
+.-.-.ARend of message
=-...-BTbreak, a pause between two parts of a message
(-.--.KNgo ahead, only the named station
&.-...ASwait
;-.-.-.CT or KAattention, start of message

This is also why a decoder has to choose when it meets .-.-.. It may show a plus sign or the letters AR, and both are right. If you need the signal and not the symbol, check how your decoder reports it, or try the Morse code translator and see which it returns.

05 / Look-alikes

Four pairs that are mirror images

Swap every dot for a dash and every dash for a dot, and some punctuation marks turn into another one. These pairs are the ones people confuse most often.

MarkPatternFlips intoPattern
,--..--?..--..
..-.-.-;-.-.-.
'.----.--....-
".-..-.)-.--.-

The quickest check is the first signal. If the pattern starts with a dash and its partner starts with a dot, you are looking at one of these pairs. Listen for the opening sound before you decide.

06 / Timing

How long punctuation takes to send

Punctuation is slow. Five marks (slash, opening parenthesis, equals, plus and ampersand) have five signals, one (the dollar sign) has seven, and everything else has six. The shortest is the ampersand at 11 units. The longest are the comma, apostrophe, closing parenthesis and exclamation mark at 19 units each, the same as the digit 0. At 20 words per minute one unit is 60 ms, so a comma takes 1.14 seconds. That is why fast operators drop commas and periods when the sense is clear. For any character at any speed, use the timing calculator.

07 / Writing it

How to write punctuation in Morse code

  • Treat each mark as one character. Put the usual single space before and after it when you write Morse.
  • Do not confuse the slash character with the word separator. The character is -..-.. The slash used between words in written Morse stands for a pause, not a symbol.
  • Use plain keyboard marks. Curly quotes, long dashes and the ellipsis character have no Morse pattern. Type a straight quote, a hyphen or three periods instead.
  • Keep marks attached to their word. A comma after “Hello” is the next character after the letter O, not a new word.
TextMorse code
What time is it?.-- .... .- - / - .. -- . / .. ... / .. - ..--..
Hello, world!.... . .-.. .-.. --- --..-- / .-- --- .-. .-.. -.. -.-.--
A+B=C.- .-.-. -... -...- -.-.
Call 911.-.-. .- .-.. .-.. / ----. .---- .---- .-.-.-

Examples use the same convention as our translator: one space between characters and a slash between words. “Hello, world!” uses the conventional exclamation mark.

08 / On the air

How operators actually use punctuation

In everyday radio use, punctuation is kept to a minimum. Operators send the question mark, the slash (in callsigns such as W1ABC/2) and the period or comma when they matter. A question mark sent on its own is often used to ask the other station to repeat. The plus sign and equals sign appear as the AR and BT signals that end a transmission or mark a pause between sections. Where the meaning is obvious, most punctuation is simply left out to save time.

09 / No pattern

Symbols that have no Morse code

Many keyboard symbols have no agreed pattern: # % * < > [ ] { } | \ ~ ^ are all examples. Most accented letters are missing from the ITU table too. When you need one of these in a message, spell it out in words (“number”, “percent”, “star”) and let the reader work out the rest. A translator should show an unsupported character clearly and not skip it silently, so you can see exactly where the gap is.

10 / Common mistakes

Where punctuation goes wrong

MistakeWhat happensHow to avoid it
Mixing up comma and question mark--..-- is read as ..--.. or the reverse.Listen for the first signal. Dashes first means comma, dots first means question mark.
Assuming every symbol is officialA message with & or $ is not decoded by a tool that follows only the ITU table.Use the 13 official marks when the reader is unknown.
Reading plus as AR (or the reverse)A sum looks like “end of message”.Decide from context: arithmetic or the end of a transmission.
Using the word separator as a slashA real slash in a date or callsign disappears.Write the character as -..-. with normal spacing.
Pasting curly quotes and long dashesThe character is reported as unsupported.Replace with a straight quote or a hyphen before converting.

11 / Try it

Check a sentence with punctuation

A quick preview. Unsupported symbols show as “?”. For the full tool, use the Morse code translator.

12 / Questions

Morse code punctuation: FAQ

Does Morse code have punctuation?

Yes. International Morse code has patterns for the main punctuation marks, including the period (.-.-.-), comma (--..--), question mark (..--..), apostrophe, colon, hyphen, slash, brackets, quotation marks, equals sign, plus sign and the @ sign. A few other marks, such as the exclamation mark, are widely used by convention but are not in the ITU table.

What is the Morse code for a question mark?

The question mark is ..--.. (two dots, two dashes, two dots). Its mirror image, --..--, is the comma.

What is the Morse code for a period?

A period, or full stop, is .-.-.- (dot dash dot dash dot dash). It is six marks long and takes 17 units to send.

How many punctuation marks are there in Morse code?

It depends on the list. The ITU recommendation covers a core set of about a dozen marks. Reference charts, including ours, usually add a few conventional ones. Our chart shows 13 official marks and 5 common extras, 18 in total.

Is there an exclamation mark in Morse code?

There is no exclamation mark in the ITU table. Operators use -.-.-- by convention, which is the letters K and W sent together. Not every list or decoder recognises it.

What is the Morse code for @?

The at sign is .--.-. and was added to International Morse code in 2004 so that email addresses could be sent. It is the letters A and C run together.

Why is the plus sign the same as AR?

Both use the pattern .-.-. . Morse code reuses patterns, and context decides the meaning. In a sum or an equation it is a plus sign. At the end of a radio transmission it is the AR signal for end of message.

Why does the comma look like the question mark?

They are mirror images. The comma is --..-- and the question mark is ..--.., so one is the other with every dot and dash swapped. Listening for whether the pattern starts with dashes or dots tells them apart.

Sources

Official marks follow ITU-R Recommendation M.1677-1. The comparison of official and unofficial marks, and the listing of prosigns and abbreviations, was cross-checked against the reference table at Morse Code World. Durations use the 1-3-3-7 timing model and 1200 ÷ WPM for the length of one dot in milliseconds.

Next step

Translate text with punctuation

Paste a sentence, see every mark converted with the right spacing, and listen to it before you send it.

Try the Morse code translator →