Sound and Timing / Guide
How Morse code spacing works
The dots and dashes are only half of Morse code. The other half is silence. A short pause keeps a letter together, a longer one ends it, and the longest one ends a word. Get those pauses wrong and a clear message turns into guesswork. This guide explains the 1-3-7 rule, how to write the gaps down, and what happens when they go missing.
Quick answer
The spacing rule in one paragraph
Morse code spacing is measured in units, where one unit is the length of a dot. A dash is 3 units. Inside a letter, the pause between signals is 1 unit. Between letters it is 3 units, and between words it is 7 units. Written down, a letter gap is one space and a word gap is a slash.
So the “1-3-7 rule” names the pause lengths: 1 inside a letter, 3 between letters, 7 between words. Add the dash (3) and you get the four numbers 1, 3, 3 and 7 that our learn Morse code guide uses.
01 / The rule
Every pause has a length
| Part | Length | Written as | At 20 WPM |
|---|---|---|---|
| Dot | 1 unit | . | 60 ms |
| Dash | 3 units | - | 180 ms |
| Gap inside a letter | 1 unit | no space | 60 ms |
| Gap between letters | 3 units | one space | 180 ms |
| Gap between words | 7 units | / | 420 ms |
The numbers are ratios, so they hold at any speed. When the speed goes up, every unit gets shorter and the proportions stay the same. The ITU standard, ITU-R M.1677-1, defines all of them. Our timing calculator shows the exact millisecond values for any speed from 1 to 80 words per minute.
02 / See it
The spacing lab
Type a short message to see its signals and gaps drawn to scale. Orange blocks are dots and dashes, the pale blocks are letter gaps and the green ones are word gaps. Change the speed or stretch the gaps with the second slider to hear the difference.
03 / Why gaps matter
Without gaps, one message becomes thousands
Morse code is not a prefix-free code. One letter’s pattern can be the start of another’s, so a stream of dots and dashes can be cut into letters in many ways. The gaps are the only thing that tells you where to cut. Here is how many ways different words can be read, using the 26 letters, when every gap is removed.
| Intended word | Sent with no gaps | Possible readings |
|---|---|---|
| E | . | 1 |
| A | .- | 2 |
| S | ... | 4 |
| SOS | ...---... | 192 |
| HELP | ......-...--. | 2,764 |
| HELLO | ......-...-..--- | 19,796 |
Take the three-dot pattern .... It could be S, or IE, or EI, or EEE. Take .-: it is A, or E followed by T. Even the short word SOS, sent as nine signals with no pauses, has 192 readings. This is exactly why SOS is a special case: the distress signal is sent as one unbroken string on purpose, and everyone recognises it as a unit. For ordinary text, always keep the gaps.
04 / Counting units
How to count a whole message
To find out how long a message takes, add up every signal and every gap in units. Take SOS. The letter S is three dots with a one-unit gap after each of the first two: 3 + 2 = 5 units. The letter O is three dashes with two one-unit gaps: 9 + 2 = 11 units. Between the three letters sit two letter gaps of 3 units each. Add it up: 5 + 3 + 11 + 3 + 5 = 27 units.
| Message | Units | At 10 WPM | At 20 WPM | At 30 WPM |
|---|---|---|---|---|
| SOS | 27 | 3.24 s | 1.62 s | 1.08 s |
| SEND HELP | 71 | 8.52 s | 4.26 s | 2.84 s |
| MORSE CODE | 89 | 10.68 s | 5.34 s | 3.56 s |
| HELLO WORLD | 111 | 13.32 s | 6.66 s | 4.44 s |
Totals include every letter gap and word gap, and no trailing gap after the last letter. Multiply the units by the length of one unit (1200 ÷ WPM milliseconds) to get the time.
05 / On paper
Writing the gaps down
On paper there is no silence to measure, so written Morse uses marks to stand in for the pauses. The common convention, and the one our translator uses, is simple.
| You are showing | Write | Example |
|---|---|---|
| Signals inside a letter | No space | .-. |
| The gap between letters | One space | .- -. -.. |
| The gap between words | A slash with a space on each side | .... .. / - .... . .-. . |
Some writers use two or three spaces for a word gap instead of a slash. It looks tidy, but spaces get squeezed by web pages, chat apps and word processors, and the word breaks vanish. A slash survives copying.
One more thing to watch for: the slash is also a real Morse character (-..-.) used in callsigns and dates. The slash between words only stands for silence. See our guide to Morse code punctuation for how the two differ. Punctuation marks follow the same rule as letters: one space before and after.
06 / Speed and Farnsworth
How speed changes the gaps
Speed in Morse code is counted with the word PARIS. Its letters add up to 31 units of signals and inner gaps, and its four letter gaps and one word gap add another 19 units: 31 + 19 = 50. So pauses make up 38 percent of the time it takes to send a word at normal timing. That is how much of Morse code is silence.
Farnsworth spacing
Beginners find this hard: at normal timing, a slow speed means slow letters, and slow letters sound like a string of unrelated beeps instead of a single shape. Farnsworth spacing solves that. Each letter is sent at a fast speed, say 20 WPM, but the gaps between letters and words are stretched until the overall speed drops to something comfortable. You hear every letter at its real tempo and still have time to think.
Here is what that looks like with letters sent at 20 WPM (where one unit is 60 ms):
| Overall speed | Letter gap | Word gap | Gap stretched by |
|---|---|---|---|
| 5 WPM | 1.60 s | 3.74 s | 8.9× |
| 10 WPM | 654 ms | 1.53 s | 3.6× |
| 15 WPM | 338 ms | 788 ms | 1.9× |
| 20 WPM | 180 ms | 420 ms | 1.0× |
The stretched gap unit is (60 ÷ overall WPM − 31 × the letter unit) ÷ 19, the standard Farnsworth calculation. At 20 WPM overall it is exactly 60 ms, so the result matches normal timing.
07 / Common mistakes
Spacing errors that break a message
| Mistake | What goes wrong | Fix |
|---|---|---|
| Same gap for letters and words | A sentence reads as one long word. | Letters 3 units, words 7 units. In text, a space and a slash. |
| A space inside a letter | .- becomes . and -, which is E and T. | Never leave a gap inside a letter when writing it. |
| No gap between letters | Letters run together and can be read many ways. | Always leave one space between letters. |
| Double or trailing spaces | A decoder may treat them as an extra word break. | One space between letters. Trim the ends. |
| Look-alike symbols | Pasted dots, en dashes or em dashes are not recognised. | Use a plain full stop and a hyphen. |
| Uneven tapping | A dash shorter than 3 units reads as a dot. | Keep the ratios. Practise with a steady beat. |
08 / Practise
Four ways to train your spacing
Count the beat
Tap a dot on count 1. Tap a dash across counts 1-2-3. Count one silent beat inside a letter, three between letters and seven between words.
Use a metronome
Set it to one click per unit, around 60 to 100 beats per minute, and tap along. It keeps your dashes and gaps honest.
Listen with long gaps
Use the lab above with the overall speed set well below the character speed. Raise it step by step as the sounds become familiar.
Record and check
Record yourself tapping SOS. Play it back and listen for dashes that are too short or gaps that blur together.
09 / Questions
Morse code spacing: FAQ
What is the 1-3-7 rule in Morse code?
It is the timing rule for gaps and signals. A dot lasts 1 unit and a dash lasts 3. The gap between letters is 3 units and the gap between words is 7. The gap between the dots and dashes inside one letter is 1 unit. Some guides call this the 1-3-3-7 rule because it lists the dot, dash, letter gap and word gap.
How long is the gap between letters in Morse code?
Three units, the same length as one dash. At 20 words per minute one unit is 60 ms, so a letter gap is 180 ms.
How long is the gap between words in Morse code?
Seven units. At 20 words per minute that is 420 ms. It is the longest pause in normal Morse.
Why is a slash used between words in written Morse code?
Written Morse cannot show silence, so a symbol stands in for the word gap. A slash is clear and survives copy and paste, while extra spaces are often collapsed by software. It is a writing convention, not part of the ITU standard.
What happens if you send Morse code without gaps?
The same dots and dashes can be read as many different messages. SOS sent as one unbroken string of nine signals can be decoded 192 different ways using letters alone, and the word HELLO can be read 19,796 ways.
Is the spacing the same in American Morse?
No. American Morse, the original telegraph version, used uneven gaps inside some characters, which made it harder to send and read. International Morse, covered here, uses the regular 1-3-7 spacing for every character.
What is Farnsworth spacing?
Farnsworth spacing sends each letter at a fast speed but stretches the gaps between letters and words. Beginners hear whole letter shapes at full speed while having more time to think. The stretch is reduced as skill grows.
How do I keep my spacing steady when tapping Morse code?
Count in your head: tap, rest for one beat inside a letter, rest for three beats between letters and seven between words. A metronome set to one beat per unit helps. Record yourself and listen back to check the gaps.
Sources
Timing and spacing follow ITU-R Recommendation M.1677-1. The description of uneven American Morse gaps is based on the overview at Wikipedia. Reading counts were calculated by us using the 26-letter International Morse alphabet. The Farnsworth calculation follows the standard amateur radio formula with PARIS as a 50-unit word.
Next step
Check your own spacing
Type a message into the translator and see how the letters and words are separated. Listen to it, then compare with what you wrote by hand.
Try the Morse code translator →